Hello,
Since a few weeks (had to reinstall after harddisk crash...) I can't get
my Hauppauge Wintv card to work anymore... I'm still using the same
.config of my working kernels before the crash but when I now 'insmod or
modprobe bttv', I get all the requiered debug in 'dmesg'. But when I'm
starting xawtv for example I get following errors:
Enterprise:~$ xawtv
This is xawtv-3.64, running on Linux/i686 (2.4.16)
can't open /dev/video0: Cannot allocate memory
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: Cannot allocate memory
v4l: open /dev/video0: Cannot allocate memory
no video grabber device available
the radio is working ok... The only thing that has changed since the
crash is the amount of memory. I bought 1GB ram. But I don't think that
this could cause the problem. Anybody an idea? Thx!
Maybe some more information:
dmesg:
bttv: driver version 0.7.83 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Host bridge is Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge
bttv: Host bridge needs ETBF enabled.
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:12.0, irq: 18, latency: 64, memory:
0xfc9fe000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is
0070:13eb
bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected]
bttv0: enabling ETBF (430FX/VP3 compatibilty)
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
i2c-dev.o: Registered 'bt848 #0' as minor 1
i2c-core.o: adapter bt848 #0 registered as adapter 1.
bttv0: Hauppauge eeprom: model=61344, tuner=Philips FM1216 (5),
radio=yes
bttv0: i2c: checking for MSP34xx @ 0x80... found
i2c-core.o: driver i2c msp3400 driver registered.
msp34xx: init: chip=MSP3415D-B3, has NICAM support
msp3410: daemon started
bttv0: i2c attach [client=MSP3415D-B3,ok]
i2c-core.o: client [MSP3415D-B3] registered to adapter [bt848 #0](pos.
0).
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
(PV951)
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc2
bttv0: i2c attach [client=Philips PAL,ok]
i2c-core.o: client [Philips PAL] registered to adapter [bt848 #0](pos.
1).
bttv: vmalloc_32(4259840) failed
bttv: vmalloc_32(4259840) failed
bttv: vmalloc_32(4259840) failed
bttv: vmalloc_32(4259840) failed
ls -al /dev/video*:
lrwxrwxrwx 1 root bttv 6 Nov 18 18:04 /dev/video ->
video0
crw-rw---- 1 root bttv 81, 0 Nov 18 18:04 /dev/video0
crw-rw---- 1 root bttv 81, 1 Nov 18 18:04 /dev/video1
Trogie
--
----------------------------------------
,*, | Tom Rogie mail: Tom@xxxxxxxx | -°)
( **) | aka Trogie site: http://tom.rogie.be | /\\
-oo0--( )--0oo--------------------------------------------_\_V--
