> > Sep 22 17:37:09 localhost kernel: msp3400: main sound carrier: > > 6.501 MHz Sep 22 17:37:09 localhost kernel: msp3400: NICAM/FM > > carrier : 5.851 MHz Sep 22 17:37:10 localhost kernel: msp34xx: > > nicam sync=0, mode=0 Sep 22 17:37:10 localhost kernel: msp34xx: > > watch: nicam 1 => 0 > > Looks fine. The driver noticed that there is no NICAM signal and you > should get mono from the main sound carrier now. > > What do you get in the log if you change the volume at that point? Ok.. log continues: Sep 22 17:37:10 localhost kernel: msp34xx: nicam sync=0, mode=0 Sep 22 17:37:31 localhost last message repeated 267 times stil silent on this point. It this moment I try change volume on TVmixer to low: Sep 22 17:37:31 localhost kernel: msp34xx: setvolume: mute=off 64881:64881 v=0x71 b=0x00 Sep 22 17:37:31 localhost kernel: msp34xx: setbass: 32768 0x00 Sep 22 17:37:31 localhost kernel: msp34xx: settreble: 32768 0x00 Sep 22 17:37:31 localhost kernel: msp3400: NICAM setstereo: 1 Sep 22 17:37:31 localhost kernel: msp34xx: nicam sync=0, mode=0 Sep 22 17:37:31 localhost kernel: msp34xx: nicam sync=0, mode=0 Sep 22 17:37:31 localhost kernel: msp34xx: setvolume: mute=off 64881:64881 v=0x71 b=0x00 At this moment I firt hear some correct mono sound. Now I change volume back Up and all is correct. Vhen i switch to another channel, all is fine.. when i swotch back to TV-prima... silent until I I change Volume. ;-/ Lukas. Louci se Lukas Gebauer. E-mail: gebauerl@xxxxxx WEB: http://www.ararat.cz/synapse - Synapse Delphi and Kylix TCP/IP Library
