probs w voodoo tv fm card: no tuner response

(resend with correct from address)

I have just gotten a used voodo tv fm card and I am having trouble
getting the tuner to respond. The cover/heatsink over the tuner chip is
very hot, making me suspect this card might be broken(?).

When I start a windows pctv app called Sattelite (just to check if the
bt878 video input is working ok) I get a lot of entries in the log that
indicates activity on the i2c bus.

19:03:46.870:00000430 - gpioremote-thread: key=0ff000
19:03:46.920:00000430 - gpioremote-thread: key=0ff000
19:03:46.970:00000430 - gpioremote-thread: key=0ff003
19:03:47.020:00000430 - gpioremote-thread: key=0ff000

(Not shure if it's important but my hauppauge wintv pci fm doesn't give
such logentries.)

 From my logfile when loading the modules;

Sep 23 21:46:23 atlantis kernel: Linux video capture interface: v1.00
Sep 23 21:46:23 atlantis kernel: i2c-core.o: i2c core module
Sep 23 21:46:23 atlantis kernel: i2c-algo-bit.o: i2c bit algorithm module
Sep 23 21:46:23 atlantis kernel: bttv: driver version 0.7.80 loaded
Sep 23 21:46:23 atlantis kernel: bttv: using 2 buffers with 2080k (4160k
total) for capture
Sep 23 21:46:23 atlantis kernel: bttv: Host bridge is Intel Corporation
440BX/ZX - 82443BX/ZX Host bridge
Sep 23 21:46:23 atlantis kernel: bttv: Host bridge needs ETBF enabled.
Sep 23 21:46:23 atlantis kernel: bttv: Bt8xx card found (0).
Sep 23 21:46:23 atlantis kernel: PCI: Found IRQ 11 for device 00:0c.0
Sep 23 21:46:23 atlantis kernel: PCI: Sharing IRQ 11 with 00:0c.1
Sep 23 21:46:23 atlantis kernel: bttv0: Bt878 (rev 17) at 00:0c.0, irq:
11, latency: 64, memory: 0xe7101000
Sep 23 21:46:23 atlantis kernel: bttv0: detected: 3Dfx VoodooTV FM/
VoodooTV 200 [card=68], PCI subsystem ID is 121a:3000Sep 23 21:46:23
atlantis kernel: bttv0: using: BT878(3Dfx VoodooTV FM (Euro))
[card=68,insmod option]
Sep 23 21:46:23 atlantis kernel: bttv0: enabling ETBF (430FX/VP3
compatibilty)
Sep 23 21:46:23 atlantis kernel: bttv0: Hauppauge/Voodoo msp34xx: reset
line init [20]
Sep 23 21:46:23 atlantis kernel: i2c-algo-bit.o: Adapter: bt848 #0 scl:
1  sda: 1 -- testing...
Sep 23 21:46:23 atlantis kernel: i2c-algo-bit.o:1 scl: 1  sda: 0
Sep 23 21:46:23 atlantis kernel: i2c-algo-bit.o:2 scl: 1  sda: 1
Sep 23 21:46:23 atlantis kernel: i2c-algo-bit.o:3 scl: 0  sda: 1
Sep 23 21:46:23 atlantis kernel: i2c-algo-bit.o:4 scl: 1  sda: 1
Sep 23 21:46:23 atlantis kernel: i2c-algo-bit.o: bt848 #0 passed test.
Sep 23 21:46:23 atlantis kernel: i2c-core.o: adapter bt848 #0 registered
as adapter 0.
Sep 23 21:46:23 atlantis kernel: bttv0: i2c: checking for TDA9875 @
0xb0... not found
Sep 23 21:46:23 atlantis kernel: bttv0: i2c: checking for TDA7432 @
0x8a... not found
Sep 23 21:46:23 atlantis kernel: i2c-core.o: driver i2c TV tuner driver
registered.
Sep 23 21:46:23 atlantis kernel: tuner: chip found @ 0xc0
Sep 23 21:46:23 atlantis kernel: bttv0: i2c attach [client=MT2032
universal,ok]
Sep 23 21:46:23 atlantis kernel: i2c-core.o: client [MT2032 universal]
registered to adapter [bt848 #0](pos. 0).
Sep 23 21:46:23 atlantis kernel: devfs: devfs_register(): device already
registered: "v4l/video0"
Sep 23 21:46:23 atlantis kernel: devfs: devfs_register(): device already
registered: "v4l/vbi0"
Sep 23 21:46:23 atlantis kernel: devfs: devfs_register(): device already
registered: "v4l/radio0"
Sep 23 21:46:23 atlantis kernel: NTFS version 1.1.17
Sep 23 21:46:23 atlantis kernel: NTFS: Warning! NTFS volume version is
Win2k+: Mounting read-only


When I try to scan using scantv I get these;


Sep 23 22:06:26 atlantis kernel: tuner: tv freq set to 0.00
Sep 23 22:06:26 atlantis kernel: tuner: TV freq (0.00) out of range (44-958)
Sep 23 22:06:26 atlantis kernel: mt2032: rfin=0 lo1=207 lo1n=25 lo1a=7
sel=4, lo1freq=1086750000
Sep 23 22:06:26 atlantis kernel: mt2032: rfin=0 lo2=199 lo2n=24 lo2a=7
num=2232 lo2freq=1047850000
Sep 23 22:06:26 atlantis kernel: tuner: tv freq set to 48.25
Sep 23 22:06:26 atlantis kernel: mt2032: rfin=48250000 lo1=216 lo1n=27
lo1a=0 sel=4, lo1freq=1134000000
Sep 23 22:06:26 atlantis kernel: mt2032: rfin=48250000 lo2=199 lo2n=24
lo2a=7 num=1512 lo2freq=1046850000
Sep 23 22:06:26 atlantis kernel: tuner: tv freq set to 55.25
Sep 23 22:06:26 atlantis kernel: mt2032: rfin=55250000 lo1=218 lo1n=27
lo1a=2 sel=4, lo1freq=1144500000
Sep 23 22:06:26 atlantis kernel: mt2032: rfin=55250000 lo2=200 lo2n=25
lo2a=0 num=252 lo2freq=1050350000
Sep 23 22:06:26 atlantis kernel: tuner: tv freq set to 62.25
Sep 23 22:06:26 atlantis kernel: mt2032: rfin=62250000 lo1=219 lo1n=27
lo1a=3 sel=4, lo1freq=1149750000
Sep 23 22:06:26 atlantis kernel: mt2032: rfin=62250000 lo2=199 lo2n=24
lo2a=7 num=2772 lo2freq=1048600000
Sep 23 22:06:27 atlantis kernel: tuner: tv freq set to 69.25
Sep 23 22:06:27 atlantis kernel: mt2032: rfin=69250000 lo1=220 lo1n=27
lo1a=4 sel=4, lo1freq=1155000000
Sep 23 22:06:27 atlantis kernel: mt2032: rfin=69250000 lo2=199 lo2n=24
lo2a=7 num=1512 lo2freq=1046850000

etc...


lastly, my /etc/modules.conf is like this;


# i2c
alias char-major-89     i2c-dev
options i2c-core        i2c_debug=1
options i2c-algo-bit    bit_test=1

# bttv
alias char-major-81     videodev
alias char-major-81-0   bttv
options bttv            card=68 tuner=33 pll=28
options tuner           debug=1 type=33
options msp3400         simple=0

Any clues of where I can look to see if this is just a configuration
problem or if the card is indeed broken?

--
-Torgeir