Hello,
I'm having problems trying to work with my video card, it's a Zoltrix
Genie TV, my computer is a PIII 933Mhz running Red Hat 7.1 with the
kernel 2.4.5.
When I load the modules, the kernel sends the following message:
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
Linux video capture interface: v1.00
bttv: driver version 0.7.68 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 02:0a.0, irq: 19, latency: 64, memory: 0xfa000000
bttv0: subsystem: 15b0:400d => Zoltrix Genie TV / Radio => card=46
bttv0: model: BT878(Zoltrix Genie TV/FM) [insmod optiobttv:n]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc0
tuner: type set to 21 (Temic NTSC (4039 FR5))
bttv0: i2c attach [Temic NTSC (4039 FR5)]
i2c-core.o: client [Temic NTSC (4039 FR5)] registered to adapter [bt848
#0](pos. 0).
seems that the problem is that the card is not found (bttv: Bt8xx card
found (0)), but in /proc/pci, I have:
Multimedia video controller: Brooktree Corporation Bt878 (rev 17).
IRQ 19.
Master Capable. Latency=64. Min Gnt=16.Max Lat=40.
Prefetchable 32 bit memory at 0xfa000000 [0xfa000fff].
Bus 2, device 10, function 1:
Multimedia controller: Brooktree Corporation Bt878 (rev 17).
IRQ 19.
Master Capable. Latency=64. Min Gnt=4.Max Lat=255.
Prefetchable 32 bit memory at 0xfa001000 [0xfa001fff].
So, the card is there. I tried installing slackware, but I receive the
same messages, so it's not a distribution problem. Also, the card works on
an IBM computer, so, the card is not the problem. what could be
happenning?
Thanks
Simon
