Hello, I have a hauppauge wintv 401 (bt878). I have 2.4.5, redhat 7.1. I have compiled bttv and xawtv. I can not however get it to work properly. Any suggestions would be great I have included some log entries: May 26 21:14:12 agm kernel: bttv: driver version 0.7.67 loaded May 26 21:14:12 agm kernel: bttv: using 2 buffers with 2080k (4160k total) for capture May 26 21:14:12 agm kernel: bttv: Bt8xx card found (0). May 26 21:14:12 agm kernel: PCI: Found IRQ 12 for device 00:09.0 May 26 21:14:12 agm kernel: PCI: The same IRQ used for device 00:09.1 May 26 21:14:12 agm kernel: bttv0: Bt878 (rev 2) at 00:09.0, irq: 12, latency: 32, memory: 0xe7800000 May 26 21:14:12 agm kernel: bttv0: subsystem: 0070:13eb => Hauppauge WinTV => card=10 May 26 21:14:12 agm kernel: bttv0: model: BT878(Hauppauge new (bt878)) [insmod option] May 26 21:14:12 agm kernel: bttv0: Hauppauge msp34xx: reset line init May 26 21:14:12 agm kernel: i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing... May 26 21:14:12 agm kernel: i2c-algo-bit.o:1 scl: 1 sda: 0 May 26 21:14:12 agm kernel: i2c-algo-bit.o:2 scl: 1 sda: 1 May 26 21:14:12 agm kernel: i2c-algo-bit.o:3 scl: 0 sda: 1 May 26 21:14:12 agm kernel: i2c-algo-bit.o:4 scl: 1 sda: 1 May 26 21:14:12 agm kernel: i2c-algo-bit.o: bt848 #0 passed test. May 26 21:14:13 agm kernel: msp34xx: init: chip=MSP3430G-A1, has NICAM support May 26 21:14:13 agm kernel: msp3410: daemon started May 26 21:14:13 agm kernel: bttv0: i2c attach [MSP3430G-A1] May 26 21:14:13 agm kernel: i2c-core.o: client [MSP3430G-A1] registered to adapter [bt848 #0](pos. 0). May 26 21:14:13 agm kernel: tuner: chip found @ 0x61 May 26 21:14:13 agm kernel: bttv0: i2c attach [(unset)] May 26 21:14:13 agm kernel: i2c-core.o: client [(unset)] registered to adapter [bt848 #0](pos. 1). May 26 21:14:13 agm kernel: i2c-core.o: adapter bt848 #0 registered as adapter 0. May 26 21:14:13 agm kernel: bttv0: Hauppauge eeprom: model=61381, tuner=Philips FM1236 (2), radio=yes May 26 21:14:13 agm kernel: tuner: type set to 2 (Philips NTSC) May 26 21:14:13 agm kernel: bttv0: i2c: checking for MSP34xx @ 0x80... found May 26 21:14:13 agm modprobe: Note: /etc/modules.conf is more recent than /lib/modules/2.4.5/modules.dep May 26 21:14:13 agm kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found May 26 21:14:13 agm kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found May 26 21:14:13 agm modprobe: Note: /etc/modules.conf is more recent than /lib/modules/2.4.5/modules.dep May 26 21:14:13 agm modprobe: Note: /etc/modules.conf is more recent than /lib/modules/2.4.5/modules.dep May 26 21:15:01 agm CROND[2918]: (rocket) CMD (ping -c 1 www.yahoo.com ) May 26 21:15:48 agm kernel: bttv0: PLL: 28636363 => 35468950 ... ok May 26 21:15:48 agm kernel: tuner: tv freq set to 0.-6 May 26 21:15:48 agm kernel: tuner: TV freq (0.-6) out of range (44-958) May 26 21:16:06 agm kernel: tuner: tv freq set to 361.25
