With bttv 0.8.12, the image freezes about three seconds after start XawTV, until I change the station. With 0.8.11 and 0.7.x works fine. dmesg: lirc_dev: IR Remote Control driver registered, at major 61 i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module Linux video capture interface: v1.00 bttv: driver version 0.8.12 loaded bttv: using 32 buffers with 2080k (520 pages) each for capture bttv: Host bridge needs ETBF enabled. bttv: Bt8xx card found (0). PCI: Found IRQ 9 for device 00:10.0 PCI: The same IRQ used for device 00:07.2 PCI: The same IRQ used for device 00:10.1 bttv0: Bt878 (rev 2) at 00:10.0, irq: 9, latency: 132, memory: 0xf4100000 bttv0: subsystem: 144f:3002 => Askey Magic TView => card=24 bttv0: model: BT878(Askey/Typhoon/Anubis Ma) [autodetected] bttv0: enabling ETBF (430FX/VP3 compatibilty) i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found @ 0x60 bttv0: i2c attach [Philips NTSC] i2c-core.o: client [Philips NTSC] registered to adapter [bt848 #0](pos. 0). bttv0: PLL: 28636363 => 35468950 ..........failed ADS Cadet Radio Card at 0x330 lirc_gpio (-1): card type 0x18, id 0x3002144f lirc_gpio (0): driver registered I'm using XFree86 4.0.1, with Xvideo and overlay. My video card is an Nvidia Riva TNT2 (latest binary modules). I've to use sloppy with 0.8.x, but other than that, it was working fine until now (oh, and the radio doesn't work with 0.8.x, but that's not a priority). Canek -- It is up to us to produce better-quality movies. -- Lloyd Kaufman, producer of "Stuff Stephanie in the Incinerator"
