I'm running linux 2.2.18pre3aa2 and gave
linux-dc10plus-driver-v0.5.tar.gz at test drive,
ending with:
Error: Error setting video parameters (in ioctl BUZIOC_S_PARAMS)
bosco# lsmod
Module Size Used by
dc10 79384 0
adv7175 2188 1
saa7110 2380 1
i2c 3328 4 [dc10 adv7175 saa7110]
videodev 2336 1 [dc10]
es1371 30016 0 (unused)
soundcore 2308 4 [es1371]
bosco# ./lavrec -t 3 -a 0 /uss/rec.avi
Recording parameters:
Output format: AVI
Input Source: Auto detect
Decimation: 4
Quality: 50
Recording time: 3 sec
MJPEG buffer size: 256 KB
# of MJPEG buffers: 64
Audio disabled
Info: Auto detecting input and norm ...
Info: Trying Composite ...
Info: input present: NTSC no color
Info: Trying S-Video ...
Info: NO signal
Info: Detected NTSC Composite
Error: Error setting video parameters (in ioctl BUZIOC_S_PARAMS)
Error: Invalid argument
(I have a B&W surveilliance camera attached to the NTSC input)
Linux video capture interface: v1.00
i2c: initialized
DC10 Miro/Pinnacle: driver version 0.5
DC10-0: Zoran ZR36067 (rev 2) irq: 19, memory: 0xe0002000
DC10-0: subsystem vendor=0x1031 id=0x7efe
DC10: 1 DC10 card(s) found
DC10: using 2 V4L buffers of size 128 KB
DC10: No video memory address supplied, trying to find a videocard
DC10: No known video card found
DC10: Host bridge: 82441FX Natoma, enabling Natoma workaround.
DC10: Initializing card[0], zr=c882eba0
DC10-0: Zoran ZR36060 (rev 1)
saa7110_attach: SAA7110A version 1 at 0x9c, status=0xd0
ADV7176_attach: ADV7176 rev. 1 at 0x56
DC10: Testing interrupts...
DC10: interrupts received: GIRQ1:61 queue_state=0/0/0/0
DC10: procfs entry /proc/zoran0 allocated. data=c882eba0
DC10 SET PARAMS: error in params for decimation = 0
Any ideas?
--
Brian Litzinger <brian@xxxxxxxxxxxxx>
Copyright (c) 2000 By Brian Litzinger, All Rights Reserved
